Graphene has attracted a significant amount of attention because to its excellent mechanical, electrical, thermal, and optical characteristics. In this work, a membrane bioreactor with hollow fibre PAN/GO nanocomposite was studied for the treatment of Persian Gulf shrimp pond wastewater. Dunaliella salina microalgae have been used for better treatment and the formation of sludge mass in a shorter period of treatment in the MBR system. Additionally, GO nanoparticles were used in order to improve the hydrophilicity of the membranes. Various tests, such as Pure water permeate (PWP), X-ray diffraction spectroscopy (XRD), Atomic force microscopy (AFM), Dynamic light scattering (DLS), Contact angle (CA), Scanning electronic microscopy (SEM), Fourier transform infrared substances (FTIR) were used to characterize the synthesized membranes. To evaluate the treated wastewater, several factors were evaluated, including: TP, TN, TSS, NTU, BOD, COD, EC. The contact angle was reduced by the inclusion of GO nanoparticles from 53.8° for PAN-0 to 45.4° for PAN-3. The results of FTIR analysis confirmed the synthesis of GO and showed the formation of different deposits as fouling on the surface of the prepared membranes after MBR process. Also, the removal percentage of COD and BOD5 was over 90% for membranes with graphene oxide nanoparticles. The turbidity for all fabricated membranes were removed ∼98%. Also, very little fouling occurred in the membranes constructed with GO membranes and the maximum concentration of GO let to maximum performance regarding to the high potential of fouling control. In addition, the growth of Microalgae Dunaliella salina with shrimp wastewater was observed successfully. In conclusion, the finding of this work not only proposed a promising solution for controlling fouling in an MBR but also resulted in a benefit product, i.e. microalgae Dunaliella salina.
