میلاد جهانگیری

From the past up to now, selecting a reliable structural system as well as analyzing and designing it accurately have considerably attracted the attention of researchers and engineers. An appropriate evaluation of the dynamic characteristics of the structures such as natural frequency and damping ratio has a considerable effect on the accurate analysis and design of structures. In addition, the vulnerability assessment of structures plays a significant role in selecting a resilient structural system against the seismicity of the area. In the light of these facts, one of the most important challenges is that the effects of non-structural components (NSCs) are commonly considered as a concentrated/distributed mass in most FE models and their stiffness and damping ratio are ignored. Therefore, this research aims to figure out the effects of NSCs on the dynamic characteristics and the vulnerability indices of concrete structures using microtremor measurements. For this purpose, the ambient vibrations of four concrete buildings (with two bending frame and two shear wall structural systems) during the construction process are measured in three independent stages: (1) after the completion of the structural system; (2) after the completion of the interior and exterior partition walls; (3) after the completion of the flooring, facade, and parapet elements (when the building is completely constructed). Afterward, to extract the dynamic characteristics and to compute the vulnerability indices of the structures, the measured microtremors are subjected to two signal processing techniques, i.e., floor spectral ratio (FSR) and random decrement method (RDM). It is observed that, by taking the effects of NSCs into account, the values of both dynamic characteristics of the concrete structures (i.e., natural frequency and damping ratio) are increased when the buildings are under the erection process. Furthermore, the obtained results for the concrete structures with the bending frame