|
Keywords
|
Tubular ceramic membrane, Blast furnace slag, Phosphorous slag, Oily wastewater treatment, Pore blocking, Valorization
|
|
Abstract
|
In this study, low-cost tubular ceramic membranes were fabricated by using waste slag and natural raw materials
in order to decrease the manufacturing carbon footprints. The effects of incorporation of phosphorus slag (PS)
and blast furnace slag (BFS) in the mullite-zeolite membrane body were investigated. The structural characteristics
of the fabricated membranes were evaluated using X-ray diffraction (XRD), field emission–scanning
electron microscopy (FESEM), atomic force microscopy (AFM), contact angle, porosity and average pore size
analyses. Thermal and mechanical stability were studied by thermogravimetric analysis (TGA) and three-point
bending test, respectively. The oily wastewater treatment tests revealed that an increase in the slag percentage
from 0 to 30% leads to enhancing the permeate flux from 99 l m-2 h-1 to 349 l m-2 h-1 for PS-based tubular
membrane and to 244 l m-2 h-1 for BFS-based tubular membrane under 1 bar applied. The chemical oxygen
demand (COD) removal percentage of all membranes was reported almost 99% for oily wastewater feed with a
COD concentration of 612 mg l-1. In addition, the investigation of membrane fouling mechanisms was carried
out using Hermia models indicating that the best correlation with the experimental data is observed for the
complete pore blocking model. This study presents experimental foundations aimed at enhancing the performance
of affordable slag-based membranes, thus fostering their applicability in engineering contexts.
|